Olycom Smart Managed Industrial Fiber Switch IM-FS840GW
Overview of gigabit managed switch
- IM-FS840GW series is the 10/100/1000 Mbps industrial fiber switch
- operating temperature -40 ℃to + 75 ℃
- support wide voltage dual power input
- support web management
- meet IP40 protection degree and EMC industrial grade requirements
- DIN rail installation
- pass through dangerous environmental certification and comply with FCC and CE standards
- The reliable industrial grade design could ensure continuous and stable operation of the automation system.
Specification of Industrial Network Switch
| Product Name | 10/100/1000Mbps Managed Industrial Fiber Switch (8F+4TP) |
| Model No. | IM-FS840GW |
| Port | 8x 100M/1G/2.5G SFP ports SM: 1310nm/1550nm,20Km; 1490nm/1550nm, 40~120Km MM: 1310nm, 2Km; 850nm, 500m 8x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Standard | IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z IEEE802.1d STP, IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344 IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az |
| VLAND ID | 4096 |
| Jumbo Frame | 9.6KB |
| MAC Address Table Size | 8K |
| Switching features | Transmission mode: storage and forward Forwarding delay: <10us System bandwidth: 58Gbps(non-traffic jam) DRAM size: 128M Flash size: 16M
Packet buffer size: 4Mb |
| Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) SFP port transmission distance: 20Km, 40Km, 60Km, 80Km, 100Km |
| LEDs | Power, network, fiber PWR: Power FX: Fiber port(1~8) Orange: Link/ACT Green: 1000M Network Speed(off when it is 100Mb/s) |
| Power supply | Input voltage:DC 12-52V No-load power:5W Reverse connection: support |
| Environment | Working temperature: -40～75°C Storage temperature: -40～85°C Working humidity: 10%～90%, non-condensing Storage humidity: 10%～95%, non-condensing |
| Industry Standards | ESD: IEC61000-4-2, ±15KV air, ±6KV contact EFT: IEC61000-4-4, General ±6KV Surge: IEC61000-4-5, Differential ±2KV, Common±6KV |
| Safety | CE-EMC: EN 55032:2015+AC:2016+A1:2020+A11:2020 EN 55035:2017+A11:2020/EN IEC 61000-3-2:2019/A1:2021 EN 61000-3-3:2013/A2:2021/AC:2022 CE-LVD: EN IEC 62368-1:2020+A11:2020 FCC: 47 CFR FCC Part 15 Subpart B(Class B)ANSI C63.4:2014 |
| Mechanical information | Shell: Corrugated metal shell Safety class: IP40 Dimension: 158 x 115 x 60mm Mounting method: Din-rail/Wall mounting |
| Warranty | Replacement within 1 year; 3 years repairing |
Key Features of Rugged Ethernet switch
- 4x 10/100/1000Mbps Auto-sensing RJ45 ports
- 8x 100/1000/2500Mbps SFP fiber port
- 6 KV Ethernet surge protection, adapt to a harsh outdoor environment Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant A store-and-forward switching mechanism
- Operating environment temperature: -40 ° ~75 ° c
Management Software Features
- Support cable diagnosis and can locate the fault point
- Support IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimize power consumption
- Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
- Support Qos, transport classification Qos, Cos, bandwidth control (input/output direction), storm suppression ,differentiated services
- Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN, Protocol VLAN,VLAN convert, MVR
- Support dynamic IEEE802.3ad LACP link aggregation, static link aggregation
- Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching Support IGMP agent report, MLD snooping
- Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+,HTTP/HTTPS, SSL/SSH v2
- Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
- Support software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade failing Support DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
- Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP
- Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,TFTP, QoS, ACL.
Packing List
Before you install the switch, please check that the package contains the following:
- A 12 port Managed Rugged Gigabit Ethernet Switch
- A warranty card
- A user Manual
- A console cable
Dimension of 12-port Industrial Ethernet Managed Switch
FAQ
1 Q: Something about pricing.
A: Good quality components for our products. Low prices for big and repeat orders.
2 Q: What is warranty time?
A: A year for commercial products and 3 years for industrial products. Technical support will be offered free.
3 Q: Do you accept sample order?
A: Yes. Sample order to check our services and quality.
4 Q:Can I have any discounts?
A: Discounts will be given to repeat orders, regular clients and discount products.
Product Tags:
|
|
1G/2.5G Industrial Managed Ethernet Switch 8 SFP Fiber 4 Gigabit Ethernet Smart Managed Images
|
